China Factory for Hammer Drill Breaker - Rotary Hammer 24mm Zh-24/zh2-24 – Zhonghan

Parameter

Advantages

1 Bit bottom and chuck mouth
2 The bit slowly turned down
3 Press a colleague to pull out the bit
Position corresponding to the
Press in place
Demolition completed. Chuck installation

Install the chuck on the drill bit (with The metal rod is screwed into the Alben chuck Put in the fastening screw and tighten it Bit installation method is consistent), so that Tighten the side hole with matching screwdriver

Application scenarios of electric hammer

Widely used in construction, decoration and other industries, suitable for concrete,Brick wall, stone, etc
Electric drill function–With impact (mechanical CAM principle)
Suitable for concrete, brick wall, stone impact drilling and wood, metal,Ceramic tile drilling operation

24mm rotary hammer introduction：

1. Flat drill function, flat drill is like ordinary electric hand drill, only drill, not hammer, mainly used for drilling wood, plastic, metal, or as a screwdriver.
2. Hammer drill mode. Hammer drill is also known as electric hammer. It will be hammered at the same time when drilling. It is mainly used to drill wall holes with good effect.
3. Chisel head angle adjustment. Strictly speaking, this is not an independent function, it is more like a supplement to the chiseling function. In this mode, there will be hammering, and the spindle will not rotate or lock. Simply speaking, it can be screwed.
4. Chiseling, the principle is the same as above, but the spindle will be locked at this time.

Plastic Blowing Box

Company Profile